EBL 600 High Pressure Ventilation Blower: Technical Characteristics and Applications in CBRN Filtration Systems
The EBL 600 is a high-pressure radial ventilation blower developed for use in CBRN filtration systems and other ventilation and air filtration applications. Its operating characteristics are intended to support airflow through system components such as ventilation ducts, filters, valves, and other elements of an air-handling installation.
According to Atmas Group, the EBL 600 generates a nominal airflow of 600 m³/h at a nominal filtration-mode pressure of 1430 Pa. The manufacturer describes the blower as highly efficient and reports that the equipment has been widely tested and certified to the SI4570 standard and other international standards.
The EBL 600 is available with an optional manual backup, providing an additional operating option within ventilation system configurations.
1. Application in CBRN Filtration and Ventilation Systems
The EBL 600 is designed for integration into the manufacturer's CBRN filtration systems and for other ventilation and air filtration applications.
In these installations, the blower generates airflow under high static pressure. This pressure allows air to be moved through different components of the ventilation system, including:
Air ducts;
Filtration units;
Valves;
Other ventilation system components.
The ability to generate airflow against the resistance of these components is an important characteristic when selecting a blower for a filtration installation. The EBL 600's published nominal filtration-mode parameters are 600 m³/h airflow and 1430 Pa pressure.
Further information about Atmas Group ventilation equipment is available on the Shelter Ventilation Blowers page.
2. Radial Blower Design and High-Pressure Airflow
The EBL 600 is identified by the manufacturer as a radial blower. It is intended for applications in which air must be moved through ducts, filters, valves, and other elements of a ventilation or air filtration system.
The manufacturer's product description highlights two principal operating characteristics:
High-pressure airflow. The blower generates airflow with high static pressure, supporting air movement through connected system components.
Ventilation and filtration applications. The unit is designed for use in CBRN filtration systems as well as other ventilation and air filtration installations.
The published specifications identify the nominal airflow and pressure specifically for filtration mode. These values should therefore be considered in the context of the operating mode stated by the manufacturer.
3. Optional Manual Backup
The EBL 600 can be supplied with an optional manual backup.
The manufacturer lists manual backup as an optional feature rather than a standard configuration on every unit. This distinction is important when specifying the equipment for a project: the required configuration should be confirmed when selecting or ordering the blower.
The product description and specifications do not state a separate airflow capacity, pressure rating, or operating procedure for manual mode. Such values should not be assumed from the electric-mode specifications.
4. Testing and Standards
Atmas Group states that EBL 600 blowers have been widely tested and certified to the SI4570 standard and other international standards.
The manufacturer associates this testing and certification with the blower's performance, safety, and reliability over time.
No additional certification numbers or test results are specified in the product information presented here. For project documentation or regulatory assessment, the applicable certificates and supporting technical documents should be requested from the manufacturer.
5. EBL 600 Main Technical Specifications
The following table reproduces the technical data published on the Atmas Group product page.
Parameter | Manufacturer's specification |
Nominal airflow (filtration mode) | 600 m³/h |
Nominal pressure (filtration mode) | 1430 Pa |
Electric motor voltage | 230 V |
Electric motor running current | 5.9 A |
Frequency | 50 Hz |
AC current configuration | 1-phase |
Manual backup | Optional |
Installation | Floor / Wall (Floor-free) |
The manufacturer notes that the data is presented as part of ARC CBRN filtration systems.
6. Electrical Configuration
The EBL 600 product specifications identify the following electrical parameters:
Motor voltage: 230 V;
Running current: 5.9 A;
Frequency: 50 Hz;
AC configuration: single-phase.
These values form part of the published technical specification and should be considered when assessing the blower's electrical requirements for a particular installation.
The product page does not provide additional information about starting current, power consumption in kilowatts, control equipment, or electrical protection requirements. These parameters should be confirmed separately for the intended system.
7. Installation Options
The manufacturer lists the EBL 600 installation configuration as:
Floor / Wall (Floor-free).
This specification identifies the installation options stated on the product page. The precise mounting arrangement and its suitability for a particular ventilation system should be established during project planning.
8. Selecting the EBL 600 for a Project
When evaluating the EBL 600 for a ventilation or filtration installation, the published parameters provide several key points for technical consideration:
Required airflow: the nominal airflow specified for filtration mode is 600 m³/h.
Operating pressure: the nominal pressure in filtration mode is 1430 Pa.
Electrical supply: the listed motor voltage is 230 V, with a running current of 5.9 A and a frequency of 50 Hz.
Electrical configuration: the manufacturer specifies a single-phase AC configuration.
Backup configuration: manual backup is available as an option and should be specified when required.
Installation arrangement: the listed options are floor and wall installation.
The final selection should be based on the requirements of the complete ventilation or filtration system, including its ducts, filters, valves, and other connected components. The published blower parameters alone do not replace a project-specific system assessment.
Conclusion
The Atmas Group EBL 600 is a high-pressure radial ventilation blower designed for CBRN filtration systems and other ventilation and air filtration applications. Its published filtration-mode specifications include a nominal airflow of 600 m³/h and a nominal pressure of 1430 Pa.
The unit is specified for a 230 V, 50 Hz, single-phase electrical supply, with a motor running current of 5.9 A. Manual backup is available as an optional configuration, and the manufacturer lists floor and wall installation options.
Atmas Group also reports that the EBL 600 has been widely tested and certified to the SI4570 standard and other international standards.
For further technical information, visit the official EBL 600 product page or explore the complete range of Atmas Group Shelter Ventilation Blowers.
Comments