Wall Sleeves and Retrofit Flanges
Wall Sleeve with Flange 4" - for Casting in Concrete
-
Number of bolts: 4
-
Type of bolts: M16
-
Standard wall thickness: 300+ mm
-
Splinter plate: optional
Wall Sleeve with Flange 6" / 8" - for Casting in Concrete
-
Number of bolts: 8
-
Type of bolts: M16
-
Standard wall thickness: 300+ mm
-
Splinter plate: optional
Wall Sleeve with Flange 14" - for Casting in Concrete
-
Number of bolts: 12
-
Type of bolts: M20
-
Standard wall thickness: 300+ mm
-
Splinter plate: optional
Retrofit Flange 4" - for Installation on Existing Wall
-
Number of bolts: 4
Retrofit Flange 8" - for Installation on Existing Wall
-
Number of bolts: 8
Chemical Resistant Gasket - for Flange
-
Number of bolts: 4 / 8
Wall sleeves are specially designed pipes with flanges which can be used to install valves or ducting to the walls. Arconik supplies variety of sleeves specially designed as per applications (internal walls/external walls) and approved as per different standards ranging from 4″ diameter to 32” diameter accommodating different thicknesses of walls. The wall sleeves are commonly installed at the early stage of rebaring and the concrete is casted on to make them a rigid and strong part of the wall.
SEND AN INQUIRY
Please fill the form and our team will contact you shortly.